Microsoft 70-411 ExamAdministering Windows Server 2012

Total Question: 249 Last Updated: March 27,2017
  • Updated 70-411 Dumps
  • Based on Real 70-411 Exams Scenarios
  • Free 70-411 pdf Demo Available
  • Check out our 70-411 Dumps in a new PDF format
  • Instant 70-411 download
  • Guarantee 70-411 success in first attempt
Package Select:

Questions & Answers PDF

Practice Test Software

Practice Test + PDF 30% Discount

Price: $110.95 $55.95

Buy Now Free Trial
PDF Version Software Version

100% Guarantee on Products High Success Rate, supported by our 99.3% pass rate history and money back guarantee should you fail your exam.

Yes Yes

Updated regularly Get hold of Updated Exam Materials Every time. Free updates without any extra charges to the actual exam.

Yes Yes

70-411 PDF Questions & Answers Available in a universal Adobe PDF format. Portable and printable anywhere anytime.

Yes Yes

Quality and Value Exact Exam Questions with Correct Answers, verified by Experts with years of Experience in IT Field.

Yes Yes

Customizable Testing Engine Simulates a real world exam environment to prepare you for 70-411 Success.

Yes

Unlimited Practice 70-411 Exam Re-takes Practice Until you get it right. With options to Highlight missed questions, you can analyse your mistakes and prepare for Ultimate 70-411 Success.

Yes

Special Promotion More than 30% Discount for Royal Pack.

Yes

Finding Down to date 70-411 dumps

Ucertify guarantee that you will find certified absolutely with all the assistance of our authentic and precise materials. Should you make wonderful achievements in the very first attempt, you will also pick Ucertify as the next certification exam practice resources supplier. Our customer support will certainly keep inside touch with a person and offering you the helping hand timely whenever you get directly into troubles. It?¡¥s our duty and main goal to reside up to the expectations and satisfaction. The IT professors help make great endeavours to create the particular Microsoft Microsoft exam questions and provide the verified answers. With the prefect answers, you can get the full and thorough understanding for your Microsoft 70-411 exam. And getting certified isnt any problem following you prepare well.

2017 Mar 70-411 actual exam

Q1. DRAG DROP 

Your network contains an Active Directory forest named contoso.com. The forest contains a Network Policy Server (NPS) server named NPS1 and a VPN server named VPN1. VPN1 forwards all authentication requests to NPS1. 

A partner company has an Active Directory forest named adatum.com. The adatum.com forest contains an NPS server named NPS2. 

You plan to grant users from adatum.com VPN access to your network. 

You need to authenticate the users from adatum.com on VPN1. 

What should you create on each NPS server? 

To answer, drag the appropriate objects to the correct NPS servers. Each object may be 

used once, more than once, or not at all. You may need to drag the split bar between panes or scroll to view content. 

Answer: 


Q2. Your network contains an Active Directory domain named contoso.com. The Active Directory Recycle bin is enabled for contoso.com. 

A support technician accidentally deletes a user account named User1. You need to restore the User1 account. 

Which tool should you use? 

A. Ldp 

B. Esentutl 

C. Active Directory Administrative Center 

D. Ntdsutil 

Answer:


Q3. HOTSPOT 

Your network contains an Active Directory domain named contoso.com. The domain contains servers named Server1 and Server2. Both servers have the DFS Replication role service installed. 

You need to configure the DFS Replication environment to meet the following requirements: 

. Increase the quota limit of the staging folder. 

. Configure the staging folder cleanup process to provide the highest amount of free space possible. 

Which cmdlets should you use to meet each requirement? To answer, select the appropriate options in the answer area. 

Answer: 


Q4. HOTSPOT 

Your network contains an Active Directory domain named adatum.com. The domain contains a server named Server1. 

Your company implements DirectAccess. 

A user named User1 works at a customer's office. The customer's office contains a server named Server1. 

When User1 attempts to connect to Server1, User1 connects to Server1 in adatum.com. You need to provide User1 with the ability to connect to Server1 in the customer's office. Which Group Policy option should you configure? To answer, select the appropriate option in the answer area. 

Answer: 


Q5. Your network contains an Active Directory domain named contoso.com. The domain contains a server named Server1. Server1 is configured as a VPN server. 

You need to configure Server1 to perform network address translation (NAT). 

What should you do? 

A. From Network Connections, modify the Internet Protocol Version 4 (TCP/IPv4) setting of each network adapter. 

B. From Network Connections, modify the Internet Protocol Version 6 (TCP/IPv6) setting of each network adapter. 

C. From Routing and Remote Access, add an IPv6 routing protocol. 

D. From Routing and Remote Access, add an IPv4 routing protocol. 

Answer:

Explanation: 

To configure an existing RRAS server to support both VPN remote access and NAT routing: 

1. Open Server Manager. 

2. Expand Roles, and then expand Network Policy and Access Services. 

3. Right-click Routing and Remote Access, and then click Properties. 

4. Select IPv4 Remote access Server or IPv6 Remote access server, or both. 


Latest 70-411 practice exam:

Q6. Your network contains an Active Directory domain named adatum.com. The domain contains a member server named Server1 and 10 web servers. All of the web servers are in an organizational unit (OU) named WebServers_OU. All of the servers run Windows Server 2012 R2. 

On Server1, you need to collect the error events from all of the web servers. The solution must ensure that when new web servers are added to WebServers_OU, their error events are collected automatically on Server1. 

What should you do? 

A. On Server1, create a source computer initiated subscription. From a Group Policy object (GPO), configure the Configure target Subscription Manager setting. 

B. On Server1, create a source computer initiated subscription. From a Group Policy object (GPO), configure the Configure forwarder resource usage setting. 

C. On Server1, create a collector initiated subscription. From a Group Policy object (GPO), configure the Configure forwarder resource usage setting. 

D. On Server1, create a collector initiated subscription. From a Group Policy object (GPO), configure the Configure target Subscription Manager setting. 

Answer:

Explanation: 

Source-initiated subscriptions allow you to define a subscription on an event collector computer without defining the event source computers, and then multiple remote event source computers can be set up (using a group policy setting) to forward events to the event collector computer. This differs from a collector initiated subscription because in the collector initiated subscription model, the event collector must define all the event sources in the event subscription. 

1. Run the following command from an elevated privilege command prompt on the 

Windows Server domain controller to configure Windows Remote Management: winrm qc –q. 

2. Start group policy by running the following command: %SYSTEMROOT%\\System32\\gpedit. msc. 

3. Under the Computer Configuration node, expand the Administrative Templates node, then expand the Windows Components node, then select the Event Forwarding node. 

4. Right-click the SubscriptionManager setting, and select Properties. Enable the SubscriptionManager setting, and click the Show button to add a server address to the setting. Add at least one setting that specifies the event collector computer. The SubscriptionManager Properties window contains an Explain tab that describes the syntax for the setting. 

5. After the SubscriptionManager setting has been added, run the following command to ensure the policy is applied: gpupdate /force. 

If you want to configure a source computer-initiated subscription, you need to configure the following group policies on the computers that will act as the event forwarders: 

* (A) Configure Target Subscription Manager This policy enables you to set the location of the collector computer. 


Q7. Your network contains four Network Policy Server (NPS) servers named Server1, Server2, Servers, and Server4. 

Server1 is configured as a RADIUS proxy that forwards connection requests to a remote RADIUS server group named Group1. 

You need to ensure that Server2 and Server3 receive connection requests. Server4 must only receive connection requests if both Server2 and Server3 are unavailable. 

How should you configure Group1? 

A. Change the Weight of Server4 to 10. 

B. Change the Weight of Server2 and Server3 to 10. 

C. Change the Priority of Server2 and Server3 to 10. 

D. Change the Priority of Server4 to 10. 

Answer:

Explanation: 

During the NPS proxy configuration process, you can create remote RADIUS server groups and then add RADIUS servers to each group. To configure load balancing, you must have more than one RADIUS server per remote RADIUS server group. While adding group members, or after creating a RADIUS server as a group member, you can access the Add RADIUS server dialog box to configure the following items on the Load Balancing tab: 

Priority. Priority specifies the order of importance of the RADIUS server to the NPS proxy server. Priority level must be assigned a value that is an integer, such as 1, 2, or 3. The lower the number, the higher priority the NPS proxy gives to the RADIUS server. For example, if the RADIUS server is assigned the highest priority of 1, the NPS proxy sends connection requests to the RADIUS server first; if servers with priority 1 are not available, NPS then sends connection requests to RADIUS servers with priority 2, and so on. You can assign the same priority to multiple RADIUS servers, and then use the Weight setting to load balance between them. 

Weight. NPS uses this Weight setting to determine how many connection requests to send to each group member when the group members have the same priority level. Weight setting must be assigned a value between 1 and 100, and the value represents a percentage of 100 percent. For example, if the remote RADIUS server group contains two members that both have a priority level of 1 and a weight rating of 50, the NPS proxy forwards 50 percent of the connection requests to each RADIUS server. 

Advanced settings. These failover settingsprovide a way for NPS to determine whether the remote RADIUS server is unavailable. If NPS determines that a RADIUS server is unavailable, it can start sending connection requests to other group members. With these settings you can configure the number of seconds that the NPS proxy waits for a response from the RADIUS server before it considers the request dropped; the maximum number of dropped requests before the NPS proxy identifies the RADIUS server as unavailable; and the number of seconds that can elapse between requests before the NPS proxy identifies the RADIUS server as unavailable. 

The default priority is 1 and can be changed from 1 to 65535. So changing server 2 and 3 to priority 10 is not the way to go. 

Reference: http: //technet. microsoft. com/en-us/library/dd197433(WS. 10). aspx 


Q8. Your network contains an Active Directory domain named contoso.com. The domain contains a domain controller named DC1 that runs Windows Server 2012. 

You have a Group Policy object (GPO) named GPO1 that contains several custom Administrative templates. 

You need to filter the GPO to display only settings that will be removed from the registry when the GPO falls out of scope. The solution must only display settings that are either enabled or disabled and that have a comment. 

How should you configure the filter? 

To answer, select the appropriate options below. Select three. 

A. Set Managed to: Yes 

B. Set Managed to: No 

C. Set Managed to: Any 

D. Set Configured to: Yes 

E. Set Configured to: No 

F. Set Configured to: Any 

G. Set Commented to: Yes 

H. Set Commented to: No 

I. Set Commented to: Any 

Answer: A,F,G 


Q9. Your network contains an Active Directory domain named adatum.com. The domain contains 10 domain controllers that run Windows Server 2012 R2. 

You plan to create a new Active Directory-integrated zone named contoso.com. 

You need to ensure that the new zone will be replicated to only four of the domain controllers. 

What should you do first? 

A. Create an application directory partition. 

B. Create an Active Directory connection object. 

C. Create an Active Directory site link. 

D. Change the zone replication scope. 

Answer:

Explanation: 

Application directory partitions An application directory partition is a directory partition that is replicated only to specific domain controllers. A domain controller that participates in the replication of a particular application directory partition hosts a replica of that partition. Only domain controllers running Windows Server 2003 can host a replica of an application directory partition. 


Q10. You have a server named Server1 that runs Windows Server 2012 R2. Server1 has the File Server Resource Manager role service installed. 

Each time a user receives an access-denied message after attempting to access a folder on Server1, an email notification is sent to a distribution list named DLL. 

You create a folder named Folder1 on Server1, and then you configure custom NTFS permissions for Folder1. 

You need to ensure that when a user receives an access-denied message while attempting to access Folder1, an email notification is sent to a distribution list named DL2. The solution must not prevent DL1 from receiving notifications about other access-denied messages. 

What should you do? 

A. From the File Server Resource Manager console, create a local classification property. 

B. From Server Manager, run the New Share Wizard to create a share for Folder1 by selecting the SMB Share - Applications option. 

C. From the File Server Resource Manager console, modify the Access-Denied Assistance settings. 

D. From the File Server Resource Manager console, set a folder management property. 

Answer:


Related 70-411 Articles